Filter
Top Products
Access the Internet
27
Copyright © 2005 Nokia. All rights reserved.
2. In the Select cellular network type dialog, select the type of cellular
network over which the Internet connection takes place: GSM/UMTS
or CDMA. You must select the network manually, if you have not
paired any mobile phone with your device.
3. In the connection setup dialog, define the following settings:
Tip: It is common in GPRS packet data networks that the
access point name is Internet or it is left blank; the dial-up
number is usually *99#; and the user name and the password
may be left blank. For CDMA packet data network settings,
contact your service provider.
Access point name — Enter the name of the Internet access point.
Obtain the name from your Internet service provider. This setting is
shown if you selected packet data connection, and your phone uses a
GSM cellular network.
Dial-up number — Enter the modem telephone number of the
Internet access point.
User name — Enter a user name, if required. The user name is usually
provided by the Internet service provider.
Password — Enter a password, if required. The password is usually
provided by the Internet service provider.
Prompt password at every login — Select this option if you wish to
write a new password every time you log onto an Internet server, or if
you do not want to save your password in the device.
4. When you are finished, tap Advanced in the Connection setup:
Complete dialog to define advanced settings, if necessary. For more
information, see the help of the application.
■ Connectivity settings
When you access an application that requires an Internet connection,
you are asked to select the connection (Internet access point) you want
to use.
In the Select connection dialog, select a connection from the list, and
tap Connect. Only available connections are shown. The connection that