Filter
Top Products
Get started
8
Copyright © 2005 Nokia. All rights reserved.
■ Charge the battery
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from the Nokia
AC-4 and DC-4 chargers.
Warning: Use only batteries, chargers, and enhancements
approved by Nokia for use with this particular model. The use of
any other types may invalidate any approval or warranty, and
may be dangerous.
1. Connect the charger to a wall
outlet.
2. Connect the power cord to the
charger connector at the base of
the device. The battery indicator bar
starts scrolling on the screen.
You can use the device while
charging. When the battery is fully
charged, the bar stops scrolling.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement, grasp
and pull the plug, not the cord.
For more information, see "Battery information," p. 41.
■ Insert the memory card
An RS-MMC and an adapter are supplied with the device. The RS-MMC
is physically smaller than a full-size MMC. You can only use FAT 16/32
formatted memory cards with this device.
Use only compatible RS-MMCs with this device. Other memory cards,
such as secure digital (SD) cards, do not fit in the MMC card slot and are
not compatible with this device. Using an incompatible memory card
may damage the memory card as well as the device, and data stored on
the incompatible card may be corrupted.