Filter
Top Products
Get started
9
Copyright © 2005 Nokia. All rights reserved.
To insert the memory card, do the following:
1. When the screen is facing down, pull the door of the memory card
slot with your fingertip (1), and rotate the door up (2).
2. Insert the memory card so that the beveled corner faces the
connectors and the golden contact area faces down.
3. Carefully slide the memory card into the slot until it locks into place
(3).
4. To close the door, rotate it back over the memory card slot, and push
it into the slot until it snaps into place. You cannot use the memory
card if the door is not closed properly.
To remove the memory card, open the door of the memory slot, and push
the card until it pops out from the slot. Close the door.
Your device allows hot swap, which means you can insert and remove a
memory card while the device is on without disturbing the system.
Important: Do not remove the MMC card in the middle of an
operation when the card is being accessed. Removing the card
in the middle of an operation may damage the memory card as
well as the device, and data stored on the card may be
corrupted.