Filter
Top Products
Settings
50
■ Call
Select Menu > Settings > Call and one of following options:
• Call forwarding (network service) — to forward your incoming calls. You may
not be able to forward your call if some call restrictions functions are active.
See Call restrictions in "Security" on page 52.
• Anykey answer > On — to answer an incoming call by briefly pressing any
key, except the power key, the left and right selection keys, or the end key.
• Automatic redial > On — to set your phone to make a maximum of 10 attempts
to connect the call after an unsuccessful call attempt.
• 1-touch dialing > On and the names and phone numbers assigned to the
1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.
• Call waiting > Activate — to set the network to notify you of an incoming
call while you have a call in progress (network service). See "Call waiting
(network service)" on page 19.
• Summary after call > On — to briefly display the approximate duration and
cost (network service) of the call after each call.
• Send my caller ID (network service) > Yes, or Set by network.
• Line for outgoing calls (network service) — to select the phone line 1 or 2 to
make calls, if supported by your SIM card.
■ Phone
Select Menu > Settings > Phone and one of the following options:
• Phone language — to set the display language. If you select Automatic, the
phone selects the language according to the information in the SIM card.
• Memory status — to view the free memory and the used memory for each
function in the list.
• Automatic keyguard — to set the keypad of your phone to lock automatically
after a pre-set time delay when the phone is in the standby mode and no
function of the phone has been used. Select On, and you can set the time
from 5 seconds to 60 minutes.
• Security keyguard — to set the phone to ask for the security code when you
unlock the keyguard. Enter the security code, and select On. When the keyguard
is on, calls still may be possible to the official emergency number programmed
into your device.
• Cell info display > On — to receive information from the service provider,
depending on the network cell used (network service).