Filter
Top Products
Using the BlackBerry Configuration for Nokia
11
Copyright © 2006 Nokia. All rights reserved.
Using the BlackBerry
Configuration for Nokia
Use the BlackBerry Configuration for Nokia to access your
corporate email from a BlackBerry Enterprise Server.
BlackBerry Configuration for Nokia enables you to create
filters, a signature for your messages, and encryption keys.
If you are using BlackBerry Internet Service, you do not
need to use the BlackBerry Configuration for Nokia.
Note: To use the BlackBerry Configuration for
Nokia, your computer must be connected to the
corporate network. If you want to set up your
device, you must also connect your device to your
computer using a data cable, infrared, or Bluetooth
wireless technology. If you just want to create
filters or change the signature, you do not need to
connect your device to the computer.
Once installed, you can open the BlackBerry Configuration
for Nokia on your PC from the Start menu or from the
desktop icon. Security settings made within the
BlackBerry Configuration for Nokia require your device
to be connected to your computer in order for the settings
to take effect.
Be sure that the check box next to Redirect incoming
messages to your handset is selected so that you will
receive messages on your device.
Creating a signature
You can create a signature that is automatically added to
outgoing email messages sent using BlackBerry Connect.
To create a signature:
1 Select the General tab.
2 Enter a signature in the Automatically include your
signature on outgoing messages field.
3 To save the signature, click Apply.
If you do not want to use a signature, clear the
Automatically include your signature on outgoing
messages field, and click Apply.
Creating filters
You can create filters that determine which email
messages are forwarded to your device.
To create a new filter:
1 Select the Filters tab.
2 Click New.
3 In the Filter Name field, enter a descriptive name for
the filter.
4 In any of the From, Sent to, Subject, Body, Recipient
Types, Sensitivity, and Importance fields, enter the
properties that you want the filter to use. Separate
multiple entries with a semicolon (;).