Filter
Top Products
Nokia D211 features
30
© Nokia Corporation 2004. All rights reserved.
Service provider domain
Type the domain name, as in company.com. You cannot connect to SIM services
without specifying the domain name. You obtain the name from your service
provider or network operator.
Prompt when a SIM service is detected
When you are connected to a WLAN and a SIM service is detected, you are asked
whether you want to get connected. Once you have confirmed that you want to
get connected, you will be authenticated to the service.
Enable advanced connection controlling
Your wireless station sends keep-alive signals on a periodic basis to an access
controller in order to check the validity of the connection. If the wireless station
receives no response, the connection is ended automatically. If you select this
check box, your wireless station and the access controller can exchange additional
signals, which enables a quicker detection of lost connection.
GSM properties
Note: The use of GSM high-speed data services requires that your network
supports the HSCSD technology and that you have subscribed to this service.
GSM high-speed data services may cost more than normal GSM data
services. Contact your service provider for more information.
Remember to select the Nokia D211 as the modem in each data and fax
communications application. Note that the modem settings have to be separately
changed in each application.
Use GSM connection with this profile
Select this check box if you want to use the profile for making data calls. When
you have an active data call, you can access the Internet and send and receive e-
mail, for example.
GSM connection method
Select the appropriate data call type. Select Analog if you are using a modem
connection. If you are using a ISDN connection, select ISDN V.110 or ISDN
V.120, depending on which ISDN standard your service provider supports.
Contact your service provider for more information on which remote ISDN
connections are supported.
GSM connection speed
Select the data transmission speed. The number of timeslots used is indicated in
parenthesis and the receiving transmission rate is mentioned first.
9.6 KBIT/S
(1+1)
The standard GSM data transmission rate. Select this option if
the network you are using does not support HSCSD technology,
or you have problems with making a data call.