Filter
Top Products
---------- 1 owner group 21039771 Apr 28 14:10 SHF_HFA_325.ipso.tgz
#
226 Closing data connection
ftp> get SHF_HFA_325.ipso.tgz
local: SHF_HFA_325.ipso.tgz remote: SHF_HFA_325.ipso.tgz
200 PORT command successful.
150 File status OK ; about to open data connection
100% |**************************************************| 20546 KB 00:00 ETA
226 File transfer successful.
21039771 bytes received in 5.79 seconds (3.47 MB/s)
ftp> bye
221 Service closing control connection
fw-test[admin]# pwd
/var/tmp
fw-test[admin]# gunzip SHF_HFA_325.ipso.tgz
fw-test[admin]# tar -xvf SHF_HFA_325.ipso.tar
cpshared_HOTFIX_HFA_325_332553963_1
fw1_HOTFIX_HFA_325_332553950_1
fw-test[admin]# ./cpshared_HOTFIX_HFA_325_332553963_1
Do you want to proceed with installation of Check Point SVN Foundation NG FP3 Support HFA 325 for Check
Point SVN Foundation NG FP3 on this computer?
If you choose to proceed, installation will perform CPSTOP.
(y-yes, else no):y
SVN Foundation: cpd is not running
SVN Foundation: cpWatchDog is not running
SVN Foundation stopped
***************************************************************************
Check Point SVN Foundation NG FP3
Check Point SVN Foundation NG FP3 Support HFA 325 installation completed successfully.
***************************************************************************
fw-test[admin]# ./fw1_HOTFIX_HFA_325_332553950_1
Do you want to proceed with installation of Check Point VPN-1/FireWall-1 NG FP3 Support HFA 325 for Check
Point VPN-1 & FireWall-1 NG FP3 on this computer?
If you choose to proceed, installation will perform CPSTOP.
(y-yes, else no):y
SVN Foundation: cpd is not running
SVN Foundation: cpWatchDog is not running
SVN Foundation stopped
Launching post-hotfix utility
***************************************************************************
Check Point VPN-1 & FireWall-1 NG FP3
Check Point VPN-1/FireWall-1 NG FP3 Support HFA 325 installation completed successfully.
***************************************************************************
fw-test[admin]#
The very last step to configuring this firewall is to run a cpconfig. When you run a cpconfig you are
setting up what type of Check Point product you wish to run. We are going to choose an “enforcement
module” or firewall. The second part to this is setting your one time password for SIC (Secure Internal
Communication). You are also able to put your license on at this time as well; we are going to put our
license on later.
NOTE: Check Point gives you a 15 day trial license so you don’t have to apply the license right away.
fw-test[admin]# cpconfig
Welcome to Check Point Configuration Program
=================================================
Please read the following license agreement.
Hit 'ENTER' to continue...