Filter
Top Products
Enter the masklength: 24
Do you wish to set the default route [ y ] ? y
Enter the default router to use with eth1: 10.0.0.254
This interface is configured as 10 mbs by default.
Do you wish to configure this interface for 100 mbs [ n ] ? y
This interface is configured as half duplex by default.
Do you wish to configure this interface as full duplex [ n ] ? y
You have entered the following parameters for the eth1 interface:
IP address: 10.0.0.1
masklength: 24
Default route: 10.0.0.254
Speed: 100M
Duplex: full
Is this information correct [ y ] ? y
Do you want to configure Vlan for this interface[ n ] ? n
You may now configure your interfaces with the Web-based Voyager by
typing in the IP address "131.87.68.50" at a remote browser.
Generating config files for fw-test: ipsrd hosts password group resolver snmp inetd ttys tz ntp ssmtp skey arp ndp
aggrclass acl ddr
ef syslog autosupport httpd lynx modem cron archive ipsec fmd AAA cluster xmode ssh iptune done.
ifmnetlog:eth4 .. enabling 10baseT/UTP port in half duplex mode
netlog:eth2 .. enabling 10baseT/UTP port in half duplex mode
netlog:eth3 .. enabling 10baseT/UTP port in half duplex mode
netlog:eth1 .. enabling 100baseTX/UTP port in full duplex mode
done.
Apr 28 16:08:20 fw-test [LOG_INFO] kernel: netlog:eth4 .. enabling 10baseT/UTP port in half duplex mode
Apr 28 16:08:20 fw-test [LOG_INFO] kernel: netlog:eth2 .. enabling 10baseT/UTP port in half duplex mode
Apr 28 16:08:20 fw-test [LOG_INFO] kernel: netlog:eth3 .. enabling 10baseT/UTP port in half duplex mode
Apr 28 16:08:20 fw-test [LOG_INFO] kernel: netlog:eth1 .. enabling 100baseTX/UTP port in full duplex mode
Wed Apr 28 16:08:23 GMT 2004
IPSO (fw-test) (ttyd0)
login: admin
Password: password
Last login: Wed Apr 28 15:58:11 on ttyd0
Apr 28 16:09:09 fw-test [LOG_INFO] login: DIALUP ttyd0, admin
Apr 28 16:09:09 fw-test [LOG_NOTICE] login: ROOT LOGIN (admin) ON ttyd0
Apr 28 16:09:09 fw-test [LOG_NOTICE] login: ROOT LOGIN (admin) ON ttyd0
Apr 28 16:09:09 fw-test [LOG_INFO] login: login on ttyd0 as admin
IPSO 3.7-BUILD027 #1215: 09.23.2003 052500
Terminal type? [vt100]
fw-test[admin]# cd /var/tmp
fw-test[admin]# ls -ls
total 1
1 -rw-r--r-- 1 root wheel 111 Apr 28 15:54 dhcpv4c_eth1c0.conf
0 -rw-r--r-- 1 root wheel 0 Apr 28 16:08 ipsopmddebug.txt
0 -rw-r--r-- 1 root wheel 0 Apr 28 15:57 ipsopmddebug.txt1
0 lrwxrwxrwt 1 root wheel 40 Apr 28 16:08 present -> IPSO-3.7-BUILD027-09.23.2003-052500-1215
fw-test[admin]#