Filter
Top Products
Under the section System Configuration click on Install New IPSO Image (Upgrade).
The screen that you are on should look like the one shown above. This is where you will need to type in
the IP Address of your FTP Server. Since you will have a cross over cable hooked to your PC and the
other end hooked to the port on the NOKIA that reads ETH-1, you will use the IP Address of your PC.
NOTE: make sure that you have an FTP Server loaded on your PC. EXAMPLE: 3COM Server.
Make sure that your FTP Server is configured for Anonymous, that way you don’t have to type in a user
name and password. Type “ftp://10.0.0.2/ipso_3_7_1_Build007.tgz” I am using IPSO 3.7.1 build 007
for an example, you use whatever IPSO version that is current or that you want to use.
Now click on Apply.
Click on the Apply button one more time and the install should start running. This load will take a few
minutes, so don’t click on anything else just let it run. You can also look on your FTP server to see the
status of your FTP session.