Filter
Top Products
Messaging
45
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234
and *.
Be precise; you need this information to set up your voicemail with dialing
codes.
Dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Speed dial voicemail with dialing codes
1. At the main screen, select Contacts > Speed dials.
2. Scroll to an empty speed dial slot, and select Assign.
3. Enter your voicemail box number, including the area code.
4. Refer to "Dialing codes" and enter codes as necessary using the information
that you saved from "Voicemail box number and process," page 44.
For example, if you pause for 5 seconds after connecting to voicemail, enter
the dialing code p twice after the voicemail box number (for example,
2145551212pp).
5. Enter any remaining numbers, dialing codes, or other information that allows
you to listen to your messages and select OK.
6. Enter a name for the number (such as voicemail), and select OK.
To dial and listen to your voicemail, press and hold the assigned speed dial key at
the main screen.
Dialing code Indicates...
*
Bypasses a set of instructions.
+
Causes the International access code to be replaced
by +.
p
Pauses for 2.5 seconds before sending any numbers
that follow.
w
Waits for you to press Call before sending the
numbers or codes that follow.