Filter
Top Products
Settings
53
Save information
1. In standby mode, select Menu > Settings > Call settings > Calling card.
2. Enter your security code, and select OK.
3. Scroll to one of the four memory locations, and select Options > Edit >
Dialing sequence.
4. Select one of the following sequence types:
Access no. + phone no. + card no.—Dial the calling card access number, phone
number, card number, and PIN, if required.
Access no. + card no. + phone no.—Dial the calling card access number, card
number, PIN (if required), and phone number.
Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the
phone number), phone number, card number, and PIN (if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name.
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your device, you can make a
call using your calling card.
1. In standby mode, select Menu > Settings > Call settings > Calling card.
2. Enter your security code, and select OK.
3. Scroll to the calling card of your choice, and select Options > Select > OK.
4. Press the end key to return to the standby screen; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call. See your calling card for
instructions.
5. Press and hold the call key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.