Filter
Top Products
[ 38 ]
2
Scroll to one of the ringing options described below, then press
Select
.
Important:
The
Silent
or
Beep once
ringing option disables any melody you may chose.
To hear a ringing tone while editing a profile, make sure one of the other ringing options
is selected.
Set a ringing tone
A ringing tone is the melody your phone plays when you receive a call. You can set the ringing
tone to a specific sound effect, or to a melody to personalize how the phone rings. Your phone
can store 20 different tones.
1
From a profile
Customize
menu, scroll to
Ringing tone
and press
Select
.
2
Scroll through the options and listen. When you hear the ringing tone you want to use,
press
Select
.
Set ringing volume
You can set the default ringing volume for incoming voice calls and message alert tones.
There are five different levels of volume.
1
From a profile
Customize
menu, scroll to
Ringing volume
and press
Select
.
2
Scroll to an option and listen. When you hear the ringing volume you want to use, press
Select
.
• RENAME PROFILES
You can rename any of the profiles except
Normal
. You may want to use your own name for
one of the profiles. When you select this profile, your name appears on the start screen.
1
Press
Menu 3
(
Profiles
).
2
Scroll to the desired profile and press
Select
.
3
Select
Customize
, scroll to
Profile name,
and press
Select
.
4
Enter the new name and press
OK
.
Select and customize an accessory profile
Note:
You must have an accessory (such as a TTY/TDD) attached to your phone prior
to selecting the
Accessory settings
menu.
Option Description
Ring
The phone rings normally.
Ascending
Ringing volume begins softly, then increases in volume if the
phone is not answered.
Ring once
The phone rings once to indicate an incoming call.
Beep once
The phone beeps once to indicate an incoming call.
Silent
The phone makes no sound.