Filter
Top Products
[ 49 ]
Advanced features
Warning:
Do not use a voice tag for dialing emergency numbers. In emergencies,
stress causes changes in your voice, which may keep the phone from recognizing
your voice command.
Dialing a number using voice dialing
Note:
You must say the name exactly as you said it when you recorded it.
1
At the start screen, press and hold
Contacts
for two seconds.
A tone is heard and
Please speak now
is displayed.
2
After the tone, clearly speak the voice tag that you recorded previously into the microphone.
Note:
If the voice tag is not recognized by the phone or if you fail to speak a tag
within three seconds after the tone, the message
Name not recognized
is displayed,
and you are returned to the start screen.
3
When the voice tag is recognized,
• The phone book entry will be displayed on the screen for three seconds
•AND
• The voice tag is replayed (through the ear piece).
After three seconds, the number is dialed.
The only other option for initiating voice dialing is to press the headset button momentarily at
the start screen. The alert tones play through the headset.
Speak the voice tag into the headset microphone. The voice tag will playback through the
headset to confirm your choice.
Work with voice tags
You can listen to an existing voice tag (in case you forgot what you recorded), rerecord a voice
tag, or delete an existing tag.
1
At the start screen, press
Contacts
. Scroll to
Voice tags
, then press
Select
.
Note:
This option displays a list of only those contacts and numbers that have been
assigned a voice tag.
2
Scroll to the phone number voice tag you want to edit, then press
Options
.
3
Scroll to either
Playback
,
Change
, or
Delete
, and press
Select
. If you chose
Change
, press
Start
to begin rerecording. The new tag that is recorded replaces the old information.
•1-TOUCH DIALING
When a phone number is assigned to one of the 1-touch dialing locations (2-9), you can call
the phone number in either of the following ways:
• Press the number key that corresponds to a 1-touch dialing location and press the
Send
key.
• Press and hold the number key that corresponds to a 1-touch dialing location until the call
is initiated.
1
is preassigned to dial your voice mailbox number and cannot be reassigned.