Filter
Top Products
[ 11 ]
Before you begin
3
Charge the battery
1
Connect the lead from the charger to
the bottom of the phone.
2
Connect the charger to a standard
wall outlet. The battery power
indicator (or battery bar) appears on
the screen and starts scrolling. If the
phone is on,
Charging
appears also.
3
When the battery is charged, the
battery bar stops scrolling.
Battery full
appears also, if the phone is
on.
4
Disconnect the charger from the phone.
For best performance, charge your phone’s battery for 24 hours before
using your phone.
Battery notes
Use the following guidelines to obtain the best performance from
your battery:
• Use the battery until it is fully discharged. Repeat this procedure
twice for a total of three charging cycles.
• Battery operation time may be less than the estimated times during
the first charges. This condition is normal.
• You can use your phone while the battery is charging. However, if the
battery is completely empty, it may need to recharge a few minutes
before you can make or receive calls or the battery indicator appears.
Note:
The battery will accept a "trickle charge" for an additional
two hours. See “Reference information” on page 118 for more
information on batteries.
Battery bar