Filter
Top Products
©2002 Nokia Corporation. All rights reserved.
Menu functions
74
• Connection security: Scroll to On or Off, and press (Select).
When connection security is on, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, set the connection security to Off.
• Bearer (a connection method): Scroll to USSD or Data, and press (Select). For pricing, the
connection speed, and other information, contact your network operator or service provider.
• Service code (shown if the bearer is USSD): Type in the code and press (OK).
• Service number (shown if the USSD address type is Service number): Type in the service number
and press (OK).
• Dial-up number (shown if the bearer is Data): Type in the number and press (OK).
• IP address (shown if the bearer is Data): Type in the address and press (OK).
• Authentication type (shown if the bearer is Data): Scroll to Secure or Normal, and press
(Select).
• Data call type (shown if the bearer is Data): Scroll to Analogue or ISDN, and press (Select).
• User name (shown if the bearer is Data): Type in the user name and press (OK).
• Password (shown if the bearer is Data): Type in the password and press (OK).
6. After you have made all the required settings, you can change the name of the setting set. Press
and then (Options), scroll to Rename, and press (Select). Type in the name and press
(OK).
The settings are now saved and you can make a connection to the WAP service.