Filter
Top Products
Settings
54
■ Call
Select Menu > Settings > Call and from the following options:
Automatic volume control — to set the phone to automatically adjust
the output volume according to the background noise
Call divert (network service) — to divert your incoming calls. You may
not be able to divert your call, if some call barring functions are active.
See Call barring service in “Security,” p. 59.
Anykey answer > On — to answer an incoming call, briefly press any key,
except the end key and the left and right selection keys.
Automatic redial > On — to set your phone to make a maximum of 10
attempts to connect the call after an unsuccessful call attempt
Speed dialling > On — to activate speed dialling. To set up speed dialling,
see “Speed dials,” p. 49. To dial, press and hold the corresponding
number key.
Call waiting > Activate — to set the network to notify you of an
incoming call while you have a call in progress (network service). See
“Call waiting,” p. 21.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID (network service) > Set by network, Yes, or No
Line for outgoing calls (network service) — to select the phone line 1 or 2
to make calls, if supported by your SIM card
■ Phone
Select Menu > Settings > Phone and from the following options:
Phone language — to set the display and writing language
Memory status — to view the free memory and the used memory in
Gallery, Messaging, and Applications
Automatic keyguard — to set the keypad of your phone to lock
automatically after a preset time delay when the phone is in the standby
mode and no function of the phone has been used. Select On, and set
the time from 5 seconds to 60 minutes.
RM-166_print_en1.fm Page 54 Monday, September 4, 2006 9:22 AM