Filter
Top Products
Settings
57
Modem settings
You can connect the phone using an IR or a data cable (CA-42)
connection to a compatible PC, and use the phone as a modem to enable
packet data connectivity from the PC.
To define the settings for connections from the PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active
access point, activate the access point you want to use, and select Edit
active access point. Select Alias for access point, and enter a nickname
for the currently selected access point. Select Packet data access point,
and enter the access point name (APN) to establish a connection to an
EGPRS network.
You can also set the dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See “Nokia PC Suite,”
p. 91. If you have set the settings both on the PC and on your phone, the
PC settings are used.
■ Enhancements
This menu is shown only if the phone is or has been connected to a
compatible mobile enhancement.
Select Menu > Settings > Enhancements. You can select an
enhancement menu if the corresponding enhancement is, or has been,
connected to the phone. Depending on the enhancement, select from
the following options:
Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call
automatically after 5 seconds. If Incoming call alert is set to Beep once
or Off, automatic answer is off.
Lights — to set the lights permanently On. Select Automatic to set the
lights on for 15 seconds after a keypress.
Text phone > Use text phone > Yes — to use the text phone settings
instead of headset or loopset settings
RM-166_print_en1.fm Page 57 Monday, September 4, 2006 9:22 AM