Filter
Top Products
Copyright © 2004 Nokia. All rights reserved.
General information
15
General information
General information
■ Access codes
Security code (5 to 10 digits)
The security code protects your phone against unauthorised use. The pre-set code is 12345. Change
the code, and keep the new code secret and in a safe place separate from your phone. To change the
code, and to set the phone to request the code, see Security settings on page 111.
If you key in an incorrect security code five times in succession, the phone ignores further entries of
the code. Wait for 5 minutes and key in the code again.
PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN
• The PIN (Personal Identification Number) code protects your SIM card against unauthorised use.
The PIN code is usually supplied with the SIM card. Set the phone to request the PIN code each time
the phone is switched on, see Security settings on page 111.
• The PIN2 code may be supplied with the SIM card and is required to access some functions, such as
call counters.
• The module PIN is required to access the information in the security module. See Security module
on page 152. The module PIN is supplied with the SIM card if the SIM card has a security module in
it.
• The signing PIN is required for the digital signature. See Digital signature on page 154. The signing
PIN is supplied with the SIM card if the SIM card has a security module in it.