Filter
Top Products
©2002 Nokia Corporation. All rights reserved.
Menu functions
69
Menu functions
2. You need to activate the set where you want to save the service settings by scrolling to the set you
want and pressing Activate . A set is a collection of settings which are needed for making a
connection to a WAP service.
3. Select Edit active service settings.
4. Select each of the service settings one by one and key in all the required settings.
• Settings name - Key in the new name for the settings set and press OK.
• Homepage - Key in the homepage address of the WAP service that you want to use, press
for a period, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure connection to the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. For pricing, connection speed and other information,
contact your network operator or service provider.
The following options depend on the selected data bearer:
• When GSM data is the selected data bearer: Dial-up number - Key in the phone number and
press OK.
• When GPRS is the selected data bearer:
• GPRS connection - Select Always online or When needed.