Filter
Top Products
©2002 Nokia Corporation. All rights reserved.
Menu functions
70
If you select Always online, the phone is automatically registered to a GPRS network when
you switch the phone on. Starting a WAP or PC dial-up application creates the connection
between phone and network and data transfer is possible. When you end the application,
GPRS connection is ended but the registration to the GPRS network remains.
If you select When needed, the GPRS connection is established when you connect to a WAP
service and closed when you end the WAP connection.
• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network. You obtain the
access point name from your network operator or service provider.
• IP address - Key in the address, press for a period, and press OK.
• Authentication type - Select Secure or Normal.
• When GSM data is the selected data bearer:
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic. Automatic is
available only if the currently selected data call type is Analogue. The actual data call speed
depends on the service provider.
• Login type - Select Manual or Automatic. If you select Automatic, the login type uses the user
name and password keyed into the following settings. If you select Manual, the login
information is required when establishing a connection.
Note that GPRS Always online requires the login type to be Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.