Filter
Top Products
Basic Operation
Switching the Phone On/Off
To switch the phone on or off.
Press and hold E to switch power on
You may see a greeting animation and the phone
will go into Idle mode.
Press and hold E to switch power off
If Keyguard is on, it must be disabled first - see “Using Key Guard”
page 17.
Making a Call
Ensure the phone is switched on, the network
operator logo is displayed and the signal strength
meter shows network coverage is available in the
current area.
Enter area code, phone number and press D
International Dialling
Using the automatic international access code (+)
you can dial international numbers without
knowing the code for the international exchange.
If the international number is known it can be
entered manually followed by the area code and
phone number.
1 Press and hold 0 until + is displayed
2 Press e to cycle through the abbreviated international country
names and press B to select the required country
3 Enter area code and phone number and press D
Note:
Many countries include an initial “0” in the area code. This should, in
most cases, be left out when dialing international numbers. If you have
difficulties making international calls, contact your Service Provider.
7
Basic Operation
GSM
Menu
Names
Country:
UK
Ok
Back