Filter
Top Products
Additional Features
DTMF Tones
DTMF tones can be sent during conversation. These are often used
for accessing voice mail, paging and computerized home banking.
For example, you may need to input a number to remotely access
voice mail messages. A phone number may be stored in the
Phonebook with DTMF tones, allowing the number to be dialed upon
recall and the DTMF number to be sent automatically.
Send DTMF Tones During a Call
Enter digits (0 to 9, # and *)
Pause Dial
Using pauses allows you to send DTMF tones automatically.
1 Enter phone number
2 Press and hold 0 until a P is displayed
3 Enter DTMF digits after the pause, for
example, enter the number to access voice
mail messages, and press D
When the call is successful DTMF tones are sent after 3 seconds or
when D is pressed.
If the DTMF tones are unsuccessful then the destination of your call
may require that the length of the tones be increased.
4 From Idle mode press B55to enter the DTMF Length
menu
5 Use e to set to Long and press B
41
Additional Features
+012345P6
Menu
Names