Panasonic EB-GD75 Cell Phone User Manual


 
The logo is now stored and can be selected as an idle screen option from
the Personalise menu.
Setting the Backlight Time
1 From Idle
ZQ
, select Personalise > Display Setting >
Backlight Time
ZQ
2 Use
e
to cycle through the times available
3
ZQ
to select the desired time
Using Voice Commands
Before any of the phone’s voice activated functions can be used, it is
necessary to configure the phone so that it will recognize a particular voice
and intonation.
Voice Dial Entry Setup
This function allows the user to recall and dial numbers from the
Phonebook using voice commands.
1 From Idle
ZQ
, select Personalise > Voice Command
> Voice Dial
ZQ
2
ZQ
to add a new Voice Dial entry to the list
3 Browse through the Phonebook to select an entry which is to be
attributed with a voice command,
ZQ
twice
Note: Each recording is short in length, so be prepared to speak soon after
initiating the recording.
4 When ready, the user should hold the phone approximately 20cm
from his/her mouth,
ZQ
and speak clearly into the
microphone to record the name of the selected Phonebook entry
When the recording has stopped, it will be necessary to repeat the name.
5 When prompted,
ZQ
and repeat the name
When recording is completed for a second time, the display will indicate if
the recording was successful or not. If unsuccessful, repeat from step 4.
22
Personalising Your Phone