Filter
Top Products
Setting the Maximum Unit Level
This function allows the user to pre - determine the maximum cost of calls
made. (Q)
1 From Idle
ZQ
, select Phone Menu > Call Service >
Service Charges > Max Cost
ZQ
2
ZQ
twice to edit the values
At this point you will be asked to enter your PIN2 or lock code
ZQ
.
3 Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost will be displayed
4
ZQ
twice to accept
Note: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. However,
call charge information may not give an accurate reflection of the tariffs
charged by your Service Provider.
Setting a Warning Level
A warning can be set as an indication that the maximum cost is about to be
reached. This function is SIM dependent.
1 From Idle
ZQ
, select Phone Menu > Call Service >
Service Charges > Warning at
ZQ
2
ZQ
twice to edit the value
3 Enter a value (in units) at which time you would like the warning to
sound
ZQ
twice
Call Identification
In the Call Service menu, the Caller’s ID and Withhold ID functions allow
you to check the status of whether a Caller’s Identification is sent or can be
received. (Withhold ID
R
)
Note: When checking the status the phone must be registered with a
network.
39
Call Information