Filter
Top Products
115
Settings
Security
PIN code
The PIN protects your SIM card against unauthorised use. If you
enable the PIN, you will be prompted to enter the PIN code every
time the phone is switched on.
The PIN2 controls security for certain service provider services such
as Fixed dial and Service charge.
Enabling/Disabling PIN entry
d Main menu > Settings > Security > PIN entry > Enable/disable
1. Select Enable or Disable
2. Enter the PIN code (4-8 digits) 7 [0]9[5] (Ok)
Changing PIN
You can change the PIN when PIN entry is set to Enable.
d Main menu > Settings > Security > PIN entry > Change PIN
1. Enter the current code 7 [0]9[5] (Ok)
2. Enter the new code 7 [0]9[5] (Ok)
3. Enter the new code again 7 [0]9[5] (Ok)
Note: If PIN is entered incorrectly 3 times the phone will be locked, and you
will need to enter the PUK code. If PIN2 is entered incorrectly 3 times SIM
card will be locked, and you will need to enter PUK2 code. If the PUK code is
entered incorrectly 10 times, the phone will cease to operate permanently.
All information stored in the SIM card will be lost and the SIM card will need
to be replaced. Contact your service provider for further information.