Filter
Top Products
•
GSM Settings
•Gateway
• IP Address: The IP address. A point is added after every 3
digits.
• IP Port: The IP port number.
• Login ID: The ID used to sign in to the gateway.
• Password: The password used to sign in to the gateway.
• Data Call Type: Press the [
l
] or [
r
] scroll key to choose
either ISDN or Analog.
•Dial Number: The dial number.
•Login ID: The ID to sign in via GSM.
•Password: The password used to sign in via GSM.
•
GPRS Settings
•Gateway
• IP Address: The IP address. A point is added after every 3
digits.
• IP Port: The IP port number.
• Login ID: The ID used to sign in to the GPRS service.
• Password: The password used to sign in to the GPRS service.
• APN: The Access Point Name.
• Login ID: The ID used to sign in to the GPRS service.
• Password: The password used to sign in to the GPRS service.
•
DNS Settings: The IP addresses for the Domain
Name Servers. You can enter the primary and
secondary DNS. This function is available only when
you are connected to HTTP.
•
Bearer: Press the [
l
] or [
r
] scroll key to select
either GPRS Only or GSM Only.
Message Lifetime:
Allows you to set the duration of time your message is
stored at the message centre while attempting to deliver it.
Auto Download:
Specifies whether you receive multimedia messages
automatically on your phone or you are notified of receiving
a multimedia message.
Press the
[
l
] or [
r
]
scroll key to select either On or Off.
Save Message:
Specifies whether multimedia messages are saved in the
Sent Box after they are sent. Press the
[
l
] or [
r
]
scroll
key to select either On or Off.
Read Report:
Specifies whether the message recipient sends you a ‘Read
Report’ when the message is read.
49
Messages
060602_PG-3300_EN(00)�‚�¬.indd 49 2006.6.8 4:52:23 PM