Filter
Top Products
26 Music & Mix
2.
In the BeDJ screen that appears, the default
music style is selected (e.g., Groovy, Techno, etc.).
3.
In the upper left part of the screen, a small table
displays the current tempo value, the status of the
recording (
Off
by default) and the name of the
track.
4.
In the bottom part of the screen, 9 tracks are
available, linked to keys
1
to
9
and which
you can mix: press the key corresponding to the
track you want to activate.
A total of 16 tracks are available: press and hold
keys
1
to
9
to open the track selection list.
Key
5
is always dedicated to the voice track.
5.
The activated track appears in orange, and the
above table displays the name of the relevant mel-
ody and instrument.
Change track melodies and instruments
Press and hold keys
1
to
9
according to the
track you would like to change. In the list that appears,
you can change first the current melody used by the se-
lected track, then the instruments used in the melody.
Melody
1.
The current melody used in the selected track is
the first one highlighted in the list. Move
+
or
-
to select another one (which is automati-
cally played when selected), then press
,
to
confirm your choice.
2.
The name of the selected melody is displayed in
the upper part of the screen. Press
>
to access
the instruments list used in this melody.
Instruments
1.
The current instrument used in the selected mel-
ody is the first one highlighted in the list.
2.
Move
-
or
+
to select the next or previous
instrument, then press
,
to select it.
Change the tempo
1.
Press
#
to activate the
Tempo
field.
2.
The
Te m po
(displayed in bmp or «beats per
minute») applies to all tracks. Press the high-
lighted
<
or
>
keys to increase or decrease
it.
You don’t have to save the
Te m po
, which is auto-
matically taken into account.
3.
Press
c
or
,
to go back one screen.
You cannot change a
Tempo
while playing tracks or
during a mix recording.
Philips535_EMEA_GB_4311 255 57351.book Page 26 Mardi, 25. novembre 2003 9:25 09