Philips X810 Cell Phone User Manual


 
30 Tools
2.
Tap on Options > Send to send the audio file via
the MMS, E-mail, or Bluetooth.
Set your recording as a ringtone
1.
Select the desired file.
2.
Tap on Options > Set as ringtone.
The recording is added to your ringtone file list.
The ringtone of your incoming calls is changed
to the recording. To change the ringtone, see
"Sounds" on page 54. To use the ringtone for
contacts, see "Add or edit contacts" on page 25 or
see "Group your contacts on the Smart
phonebook" on page 26.
Use your clock and timer
Alarm
You can set up to five alarms.
To set an alarm
1.
Check that your clock is correctly set (see
"Set clock" on page 9).
2. Go to Tools > Alarm.
The screen of alarm list appears.
3. Select an alarm, and tap on Edit to enter the
alarm setting screen.
Set time: Set the alarm time.
Repeat: Repeat the alarm once or on some of
the weekdays or weekends. To repeat the
alarm at certain days, press
< or > to select
Days, tap on a weekday or weekend, and then
On/Off to select or unselect the day.
Alarm tone: Tap to select an alarm tone.
Snooze: Select Off, or an alarm interval: 5, 10,
or 20 minutes.
4. Tap on Done when you finish setting the alarm.
5. To turn off an alarm, tap on an alarm, and then
Off.
To use an alarm
On the set alarm time, your alarm sounds.
Select Stop: The alarm stops. If you have selected
repeat mode for the alarm (see “To set an alarm”),
it will sound again at the set time.
Select Snooze: The alarm will sound again after the
set Snooze interval.
To mute the sounding alarm, you can also turn
over the phone (front side to the back, back side to
the front, see "To use the motion sensor" on page
4).
The alarm clock will ring even if your mobile
phone is switched off, or the Profiles is set to
Meeting or Silent.