Filter
Top Products
SpectraLink 8020/8030 Wireless Telephone Configuration
1725-36030-001_B.doc 25
Phone Config
Telephony Protocol
Telephony Protocol lets you select the VoIP protocol that your site is
licensed to download and run. The SpectraLink Radio Protocol (SRP)
used for the SpectraLink 8020/8030 Wireless Telephones in a
SpectraLink 8000 Telephony Gateway system requires Telephony
Protocol type
030. Any other protocol will cause the handset to
malfunction.
Push-to-talk
PTT is disabled by default. When enabled, all 24 PTT channels are
allowed by default. To toggle the allowed status of any channel, select
Enable Channels, scroll to the channel to be disallowed and press
NavOK. Enabled channels are displayed with an asterisk (*) in the left
column. Only those channels enabled in the Admin menu will appear
on the
Config menu where they can be subscribed to by the end user.
The priority channel, labeled by default as channel 25, may be set and
will be available to all PTT handsets. When a PTT broadcast is made
on the priority channel, it will override any active PTT transmission
on all other channels.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time
(GMT) is the default.
Daylight Savings
The handset may be adjusted for daylight savings time.
Protected Speed-dial
The protected speed-dial number is designed to be programmed to a
number that should be called in emergency situations. It appears as
the first item on the speed-dial list and is specially marked with a
greater-than symbol (>) as the first character in its name. Only one
such number can be programmed Enter the number to be dialed, the
name (e.g.
Security), and scroll to assign to one key press. The choices