Polycom 8030 Cell Phone User Manual


 
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
70 1725-36030-001_B.doc
Message Description Action
System Locked
(with Busy Tone)
Gateway is locked.
Try the call again, the system has
been locked for maintenance.
TFTP ERROR(x):yy
A failure has occurred during a TFTP
software download. (x) = The file number
which was being downloaded; yy is an
error code describing the particular
failure. Possible error codes are:
01 = TFTP server did not find the
requested file.
02 = Access violation (reported from
TFTP server).
07 = TFTP server reported "No such
user" error.
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did not
respond within a specified period of time.
Error code 01, 02 or 07 - check the
TFTP server configuration.
Error code 81, the handset will
attempt to download the file again.
For other messages, power off the
handset, then turn it on again to retry
the download. If the error repeats,
note it and contact Polycom
technical support.
Too many errors
The handset continues to reset and
cannot be recovered.
Fatal error. Return handset to
Polycom.
Unknown
xx:yy:zz
A phrase is missing from the phintl file.
Download new software from the
SpectraLink site per Chapter 7
Software Maintenance.
Updating …
The handset is internally updating its
software images
None. The handset may do this
briefly after a download. This is
informational only.
Updating Code
Handset is downloading new software
into memory. The number icons at the
bottom of the display indicate which file
number is currently being downloaded.
This message also displays a progress
bar. When the progress bar fills the
display line the update operation is
complete on that file.
None. When the progress bar fills
the display line the update operation
is complete on that file.
Do not turn the handset off during
this operation.
Wrong Code Type
The software loaded into the handset is
the wrong type for this model handset.
Verify the license type is set
correctly.
If the license type is correct, replace
the software image on the TFTP
server with the software that is
correct for the handset model.
Waiting
Handset has attempted some operation
several times and failed and is now
waiting for a period of time before
attempting that operation again.
None. The handset is waiting for a
specified period of time before
attempting that operation again.