PYLE Audio SIP 3.2.1 Cell Phone User Manual


 
User Guide for the SoundPoint IP 32x/33x Desktop Phone
2 - 2
Configuring Basic Settings
To configue basic settings, press , and then select Settings >
Basic. You can configure the following basic settings:
The appearance of the time and date
Display contrast
Backlight intensity (SoundPoint IP 335 only)
Headset Memory Mode
Headset hookswitch selection
Ring type
Language support (localization)
Directory search
You can mute the microphone and adjust the volume using separate keys.
Appearance of Time and Date
The time and date appears on the graphic display of the SoundPoint
IP 32x/33x SIP phone. If the phone cannot obtain a time and date from a
configured SNTP server, the display will flash. Contact your system
administrator if either the time or date is incorrect.
You have control over the format of the time and date display and can turn the
display of time and date off. The default time and date format appears in the
following figure.
To configure the time and date:
1. Press .
2. Select Settings > Basic > Preferences > Time & Date.
3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
4. Scroll through the options under each of these selections using the
and .