PYLE Audio SIP 3.2.1 Cell Phone User Manual


 
Customizing Your SoundPoint IP 32x/33x Phone
2 - 7
3. Use the or to select your headset and press the Select soft key.
4. Press or the Exit soft key repeatedly to return to the idle.
Ring Type
You can select from the different ring types to distinguish between lines or to
have a different ring from your neighbor’s phone. You can set distinctive
incoming ringing tones for contacts in your local directory (refer to Editing
Contacts on page 1-3).
To change the incoming ring to a desired sound:
1. Press .
2. Select Settings > Basic > Ring Type.
3. (Optional) If multiple lines are configured on your phone, first select the
line to change from the list using and .
4. Using and , select the desired ring type.
Press the Play soft key to hear the selected ring type.
5. Press the Select soft key to change to the selected ring type.
6. Press or repeatedly to return to the idle display.
Note
If you configure your SoundPoint IP 32x/33x phone for silent ring, press the ringing
Line key or the Answer soft key to answer the call. If your handset is off hook, the
call is routed to the handset. If your handset is on hook, the call is routed to the
speaker.