PYLE Audio SIP 3.2.1 Cell Phone User Manual


 
Troubleshooting Your SoundPoint IP 32x/33x Phone
5 - 5
Calling
Symptom Problem Corrective Action
There is no dial tone. Power is not correctly applied to
the SoundPoint IP 32x/33x
phone.
Do one of the following steps:
Check that the display is illuminated.
Make sure the LAN cable is inserted
properly at the rear of the phone (try
unplugging and re-inserting the
cable).
If using Power over Ethernet (PoE),
have your system administrator check
that the switch is supplying power to
the phone.
Dial tone is not present on one of
the audio paths.
Do one of the following steps:
Switch between Handset, Headset (if
present) or Hands-Free
Speakerphone to see if the dial tone is
present on other paths.
If the dial tone exists on another path,
connect a different handset or
headset to isolate the problem.
The phone is not registered. Contact your system administrator.