Filter
Top Products
14
BASIC OPERATION
TURNING THE PHONE ON/OFF
To turn on the phone
, flip down the cover then press .
The phone performs a short self test and sounds a tone or vi-
brates (see “Changing the Alert Type” on Page 29), then the
signal strength meter appears (see “Signal Strength/Service
Area”) and the keypad backlight turns on for about 16 sec-
onds. The phone is ready to use when the green power/lock
indicator begins to flash.
Notes:
The keypad backlight turns on for about 16 seconds
every time you press a key, then it turns off and the display
goes blank to conserve battery power.
To turn off the phone
, press again. The display goes
blank and the green on/lock indicator turns off.
SIGNAL STRENGTH/SERVICE AREA
Each time you turn on the phone, clear the display, or make a
call, the signal strength meter appears on the display to indi-
cate the strength of the cellular signal currently being re-
ceived. The more bars that appear on the meter, the stronger
the signal.
Notes:
• If few or no bars appear (meaning the signal strength is
weak) and you want to make or receive a call, move the
phone to a different location so the signal strength
increases.
PWR
PWR
17-1111.fm Page 14 Wednesday, July 21, 1999 2:23 PM