Filter
Top Products
42
CHANGING INFORMATION IN A
MEMORY LOCATION
1. Recall the memory location information.
2. Press (if necessary) to display the phone number.
3. Repeatedly press to backspace and erase digits,
then enter the correct numbers; or, to simply add digits to
the existing number, enter the additional numbers. Then
press and enter the two-digit memory number.
Alpha
or
STO
appears to prompt you for the next step.
Note:
If you enter an invalid location number (such as
51), the phone displays
Invalid
Locatn
followed by
the location prompt. Enter a valid location number.
Or, if you want to edit only the name, press , enter
the two-digit memory location number, then skip to the
next step.
4. Repeatedly press or to erase each character
you want to change, then enter the correct character(s).
Or, to simply add characters to the existing name, enter
the additional characters.
Or, if you do not want to edit the name, skip to the next
step.
5. Press . The selected memory number and
Full
appear briefly, then the phone number and
Change?
flash. Press again to store the edited memory. The
memory location number appears briefly to confirm the
entry.
RCL
CLR
STO
STO
CLR
STO
STO
17-1111.fm Page 42 Wednesday, July 21, 1999 2:23 PM