Filter
Top Products
29
Alternate between calls
If you subscribe to a call waiting service you can
receive incoming calls while already connected to
a call.
1. During a call, if you receive an incoming call,
click Answer - Hold Current. The current call
is put on hold and you are connected to the
incoming call.
2. Click the trackwheel.
3. Click Flash to alternate between calls.
Note:
To alternate between two connected calls, you can
also press the Enter key.
Mute a call
To mute a call, press the Phone button. Press the
Phone button again to turn mute off.
Adjust the phone volume
During a call, roll the trackwheel up to increase
the volume or roll the trackwheel down to
decrease the volume.
Use other programs during a call
To use other programs during a call, click the
trackwheel. Click Home Screen.
Dial using letters
To type a letter during a call, press the Alt key.
Type the letter.
To type multiple letters during a call, press the
Right Shift key + the Alt key. Type letters. To dial
numbers again, press the Right Shift key.
Note:
When you type a letter in a phone number, your
handheld dials the number that is associated with
the letter on a conventional phone keypad.
Make a three-way call
1. During a call, click the trackwheel.
2. Click 3-Way Call.
3. Type a phone number or click a contact.
4. Click enter twice.
5. During the second call, click the trackwheel.
6. Click Flash.
Notes:
The Active Call screen shows that you are only
connected to the second contact even though you
are connected to both calls.
To disconnect from the second contact, click the
trackwheel. Click Flash.
Related topic
• Can I make three-way calls?
Assign a speed dial letter
In the phone, select a contact or phone number.
Press and hold any unassigned letter key. Click OK.
Related topic
• Assign speed dial to a contact in your
address book
Assign speed dial to a contact in
your address book
1. In the phone, click the trackwheel.
2. Click View Speed Dial List.
3. Select an unassigned letter.
4. Click the trackwheel.
5. Click New Speed Dial.
6. Select a contact.
7. Click the trackwheel.
8. Click Add Speed Dial To <contact name>.