Filter
Top Products
BlackBerry
®
Curve
™
7
Insert & Charge the Battery
Insert the Battery
1. Press the battery cover release
button on the back of the
BlackBerry Curve and slide
off the battery cover.
2. Insert the battery so that the metal
contacts on the battery align with
the metal contacts on your
BlackBerry Curve.
3. Slide the battery cover back onto the
BlackBerry Curve so that the cover
lies flat and clicks into place.
Charge the Battery
4. Pull the plug blades down on the travel charger.
5. Connect the small USB end of the travel charger
cable to the USB port on the side of your
BlackBerry Curve.
6. Plug the travel charger into a power outlet.
7. Charge the battery to full power.
CAUTION: Use only those accessories approved by Research In Motion (RIM). Using any
accessories not approved by RIM for use with this particular BlackBerry device model
might invalidate any approval or warranty applicable to the device might result in the non-
operation of the device and might be dangerous.
Steps?
7
Note:
If the battery
is charged, the
BlackBerry Curve
should turn on. If
the device does not
turn on, charge the
battery. Charging
the battery can take
an hour or longer.
If you have an
available USB
port on your
computer and you
have installed the
BlackBerry
®
Desktop Software,
you can use the USB
cable that came
with your device to
connect your device
to your computer
for charging. For
more information,
see the “Sync your
BlackBerry Curve
with your
Computer” topic.