Filter
Top Products
Appendix B - Safety instructions
SAGEM F@st™ 800 / 840 (PPP) User Guide - 288 047 975-02
Page B-2
Reproduction and communication prohibited without the written permission of Sagem Communication
B.1 Safety instructions
READ THE FOLLOWING
INSTRUCTIONS CAREFULLY
Environment
¾ The SAGEM F@st™ 800 / 840 must be installed and used inside a
building (for desktop use).
¾ The ambient temperature must not exceed 45°C.
¾ The SAGEM F@st™ 800 / 840 must not be exposed to strong
sunlight or to a strong heat source.
¾ The SAGEM F@st™ 800 / 840 must not be placed in an environment
subject to significant steam condensation.
¾ The SAGEM F@st™ 800 / 840 must not be exposed to water
splashes.
¾ The SAGEM F@st™ 800 / 840 must not be covered.
Maintenance
¾ Do not open the casing. This action is reserved only for qualified
personnel and only when approved by your operator.
¾ Cleaning: Do not use liquid or aerosol-based cleaning agents.
Power source
The modem is powered via the USB port on your PC. Check that the
USB cable supplied with the hardware is not damaged (cable and
plugs).
USB port SELV
1
Safety levels
LINE port TNV-3
2
Products bearing this symbol are compliant with EMC regulations and
with the Low Voltage Directive published by the Commission of the
European Communities (CEC).
CE declaration of
conformity
Sagem Communication declares that the SAGEM F@st
TM
800 / 840
product is compliant with the requirements of European directives
1995/5/CE and with the main requirements of directives 89/336/CEE
dated 03/05/1989 and 73/23/CEE dated 19/02/1973.
The CE declaration of conformity for the SAGEM F@st
TM
800 / 840 is
made in the context of the R&TTE directive.
1
Safety Extra Low Voltage circuit
2
Telecommunication Network Voltage level 3 circuit