Filter
Top Products
121
Configuring Camera Options
1. In Capture mode, press
Menu
to use use various options for the camera module.
The following options are available:
• Camera/Camcorder
: allows you to take a picture or record a video.
• Shooting Mode
: takes a photo in various modes. Once you change the mode, the corresponding indicator displays at the top
left of the display.
–
Single shot
: takes a single photo and allows you view it before returning to the shooting mode.
–
Multi-shot
takes a succession of consecutive photos.
–
Mosaic shot
takes up to four photos and then groups them together into a single final photo.
–
Frame shot
: displays a frame on the screen so you can center the photo in your shot like a postcard.
•Size
: allows you to set the image size to either: 1280x1024, 1024x768, 800x600, 640x480, 320x240 and 220x165. The
selected image size displays on the capture screen.
•Timer
: allows you to set a time delay before the camera takes the photo. Select the length of delay you want. When you press
the
Camera
key
or key, the camera takes the photo after the specified time has elapsed.
• White balance
: allows you to set this option from the following choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Effects
: allows you to change the color tone or apply special effects to the photo.
–
Options include
: No effects, Black & White, Negative, Sepia, Emboss, Sketch, Antique, Moonlight, and Fog.
• Set Default destination
: allows you to
Remove
a current destination location or
Change
the current location by establishing a
new folder in which to place the photo(s). Select from the following options: Recent recipients, Phonebook, Phone number,
E-mail address, or My Album.
•Shortcuts
: allows you to view a quick list of shortcuts such as Mode, Shooting mode, Timer and Viewfinder mode.
• Settings
:
–
General settings
:There are two typs of general settings: Zoom sound (creates a sound when you zoom the camer) and Brightness sound
(creates a sound when you adjust the brightness). You can activate (turn On) or deactivate (turn Off) these sounds.
–
Camera settings
: consist of the following:
-
Shutter sound
: allows you to select a tone to play when the camera’s shutter opens and closes. Sound selections are Shutter1,
Shutter2, and Shutter3.
-
Viewfinder mode
: allows you to set the view finder to Full screen, Full screen & Indicator, or Full screen & Guideline.
-
Scene program
: allows you to set the camera options to capture normal or night scene.
-
Exposure metering
: allows you to set how the camera measures or meters the light source: Normal, Center-weighted, or Spot.
-
Single shot
: allows you to select whether you want the single shot option set to Take and Send or Take and Preview.
t459.book Page 121 Tuesday, October 7, 2008 1:26 PM