Filter
Top Products
90 2G. Camera
4.
Read the Connect Printer message and press
Next (left softkey). The Select Folder pop-up appears
in the display. Select the folder location of the
image.
5. Highlight the desired image and press Print (left
softkey). (To select multiple images, press to
place a check mark next to each image selected.)
6. Set the printer settings using your navigation key.
Ⅲ Copies: to set the number of copies to print.
Ⅲ Typ e: to select a print type option:
● Borderless prints the standard image without a
border. Other printers may also display:
1-Up,
2-Up, and 4-Up.
● Index prints the index information.
Ⅲ Paper Size: You can set the print size from Default or
4x6. (Print sizes may vary according to the type of
printer you have.)
Ⅲ Date Print: You can imprint the date on your
pictures. Select
On or Off. (Date stamping may not
be available depending on the type of printer you
have.)
Ⅲ Border: You can assign a border along the edges
of the image. You can turn this option on or off.
7. Press Preview (right softkey) to preview the image,
or press
Print (left softkey) to print the image.
8. Select Yes to confirm printing. Follow the
instructions on the display to unplug the USB
cable from the phone.
Note
These options may vary and are dependent on the
printer’s capabilities.
Note
These sizes may vary and are dependent on the
printer’s capabilities.
PictBridge
Error
Messages
From time to time you may encounter printing
problems. Your phone will display any printer
error messages informing you of the specific
problems encountered. Please refer to the
user’s guide that came with your printer for
descriptions, explanations, and possible
resolutions for any error messages.
Sprint M330.book Page 90 Friday, July 31, 2009 11:35 AM