Filter
Top Products
58 2D. Contacts
Adding a New Group
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1. Press > Contacts.
2. Press Options (right softkey) > New Group to create a
new Group category.
3. Read the onscreen information and press Start
(left softkey).
4. Add multiple entries (two or more) to your new
group by highlighting a name from the list and
pressing . This action places a check mark
alongside the name.
5. Press Continue (left softkey) and enter a name for
the new group. (See “Entering Text” on page 27.)
6. Press Save (left softkey) to assign the selected
entries to the new group.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer
Types” on page 34.)
1. Display a Contacts entry and press Options (right
softkey)
> Edit Contact.
2. Highlight the current ring type and press to
display the Select Ringer menu.
3. Select a ringer type, such as Default Ringer,
Downloaded Ringers, Other Ringers, or No Ringer.
4. Scroll through available ringers. (To hear a sample
ringer, highlight a ringer type.)
5. Highlight a ringer and press .
6. Press Done (left softkey) to save the new ringer
type.
Note
If several numbers are saved within a single Contacts
entry, you can select from these additional numbers
by using the left or right navigation keys.
Sprint M330.book Page 58 Friday, July 31, 2009 11:35 AM