Filter
Top Products
20 2A. Phone Basics
ⅷ Contact Details: Displays the details for a Contact if the
entered number matches a previously created entry.
ⅷ Save: Enter a seven-digit or ten-digit number (phone
number and area code) and press
Options (right
softkey)
> Save to save the phone number in your
Contacts. (See “Saving a Phone Number” on
page 24.)
ⅷ Hard Pause: Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input).
Ⅲ Once used, a popup menu asks if you would like
to send the remaining numbers. To continue
dialing, you must press
Send Tones (left softkey).
(See “Dialing and Saving Phone Numbers With
Pauses” on page 25.)
ⅷ 2sec Pause: Enter digits and then use this feature to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 25.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by opening the phone or by
pressing any number key. See “Call Answer Mode”
on page 44 for more information.)
Your phone notifies you of incoming calls in the
following ways:
ⅷ The phone rings or vibrates.
ⅷ The indicator light flashes.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
Tip
To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 56.) (This feature will
not work when you are roaming off the Nationwide
Sprint Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)
Sprint M330.book Page 20 Friday, July 31, 2009 11:35 AM