Filter
Top Products
80 2G. Camera
3.
Press when you are ready to start the timer.
(The timer is displayed at the bottom of the display
screen during the self-timer countdown.)
4. Get ready for the picture. (The phone will begin to
beep for each second of the countdown. When the
timer is down to three seconds, the outer LED will
go from blinking green to blinking red just before
the picture is taken.)
To cancel the selftimer after it has started:
ᮣ Press .
Using the Zoom
This feature allows you to zoom in on an object when
you take a picture. Depending on your resolution
settings, you can adjust the zoom from 1x to 9x.
1. From camera mode, use the navigation key to
zoom in (right) and zoom out (left). It may take
several presses to get the desired zoom.
2. Press or the camera button to take the picture.
Selecting Camera Settings
1. From camera mode, press Options (right softkey) >
Settings.
2. Select an option and press :
Ⅲ Resolution to select the picture’s file size (High, Med,
or
Low).
Ⅲ Quality to select the picture quality settings (Fine,
Normal, or Economy).
Ⅲ Shutter Sound to select a shutter sound (Shutter 1-4
or
Off).
Ⅲ Status Bar to select whether you wish to display the
onscreen Status Bar during use of the camera.
Displayed at the right of the screen.
Note
While the selftimer is active, all keys are disabled
except
and .
Note
Zooming will not function if the resolution is set to
High.
Zooming works by allowing up to 9x magnification of
the image.
Sprint M330.book Page 80 Friday, July 31, 2009 11:35 AM