Filter
Top Products
52
Section 3
6. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After six
sets of digits, the phone asks whether you want to do
more adaptation. Answer “Yes.”
7. Repeat steps 4-6 for another six sets of digits. After the
sixth set of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. In standby mode, press the left soft key ( ) Menu,
then press (Voice Kit), (Voice Setting),
(Digit Dialing), (Reset Digits). A
confirmation message appears in the display asking if
you are ready to reset digit adaptation.
2. Press the ( ) OK to proceed, or press the right soft
key ( ) Back to return to the Voice Setting sub menu.
3. If you pressed the left soft key ( ) OK, a confirmation
message appears in the display that Digit Dial adaptation
has been reset.
Looking up contacts
Use the Lookup command to look up contact information
for any person stored in your Contacts list.
1. In standby mode, press . The phone prompts,
“Say a command.”
2. Say “Lookup” followed by the name of a person in your
Contacts list.