Filter
Top Products
Section 12
138
3. Wait for the beep and say the digits using your normal
tone of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
ⅷ If the recording was good, say “Yes.”
ⅷ If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
5. After 10 sets of digits, “Adaptation complete” plays
through the speaker and you are returned to the Setup
Digit menu.
Reset Digits
To reset digit dialing to factory default settings, do the
following:
1. In standby mode, press the MENU ( ) key, then press
(for Tools), (for Voice Kit), (for Voice
Setting), and for Digit Dialing. The following
options appear in the display:
ⅷ Adapt Digits
ⅷ Reset Digits
2. Use the navigation keys to highlight Reset Digits, then
press the key. The phone prompts you to confirm
digit rest.
3. Press the OK (left) soft key ( ) or the key to reset
your digit adaptation, or press the Back (right) soft key
( ) to cancel.
OK
@
@
OK
OK