Filter
Top Products
Section 11: Camera 101
Note: The resolution setting affects zoom capabilities. When resolution is set to High, zoom is not available.
When resolution is set to Medium, X1 and X2 are available. When resolution is set to Low, X1, X2, and X3
zoom settings are available.
Self Timer
Self Timer lets you delay taking a picture long enough to let you join others in a
picture.
1. In camera mode, press the Options (right) soft key ( ).
2. Use the navigation keys to highlight Self Timer, then press the key.
The following options appear in the display:
ⅷ Off
ⅷ 3 seconds
ⅷ 5 seconds
ⅷ 10 seconds
3. Use the navigation keys to highlight the desired delay, then press the
key. The camera screen appears in the display.
The next time you press the Camera key ( ) or the key, a countdown
timer appears in the display that indicates the time remaining before the
camera takes the picture. A beep tone sounds each of the last five
seconds until the picture is taken.
Tip: To temporarily stop the countdown timer, press the key or the Camera key. To restart the timer,
press the key or the Camera key again.
Flash
Flash lets you control whether the camera flash lights (Off) and when [always (On),
automatically (Auto), one shot only (Only This Shot)].
1. In camera mode, press the Options (right) soft key ( ).
2. Use the navigation keys to highlight Flash, then press the key. The
following options appear in the display:
ⅷ Off
ⅷ On
ⅷ Auto
ⅷ Only This Shot
3. Use the navigation keys to highlight the desired flash setting, then press
the key. The camera screen appears in the display.