Filter
Top Products
138
• Call Emergency Numbers in Lock Mode
1.
In standby mode, enter the emergency number.
2. Press the key to place the call.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1. In standby mode, press the MENU key ( ), then press (for
Settings), and (for Phone Settings), and for Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, the press for Reset Phone. A prompt appears
in the display asking if you wish to restore default settings (except for the
Contacts and Voice Dial).
3. Press the Yes (left) soft key ( ) to restore default settings or press the
No (right) soft key ( ) to return to the Security sub-menu.
NAM Selection
The Network menu allows you to select NAM (Number Assignment Module) settings
for your phone. You can store two NAM settings, which are essentially telephone
numbers, for your phone.
1. In standby mode, press the MENU key ( ), then press (for
Settings), and (for Phone Settings), and for NAM
Selection. The following options appear in the display:
ⅷ NAM1 — Your service contract has one phone line.
ⅷ NAM2 — Your service contract has two phone lines.
2. Use the navigation keys to highlight the desired option, then press the
key to save your setting.
The phone powers itself off and back on.
System Select
The System Select menu allows you to select the roaming setting for your phone.
1. In standby mode, press the MENU key ( ), then press (for
Settings), and (for Phone Settings), and for System
Select. The following roaming options appear in the display:
ⅷ Home only — Your phone is available for normal operation only within your
designated coverage area.
ⅷ Automatic — The Preferred Roaming List (PRL) is used to acquire service. If no
preferred systems are found, any digital system is acquired.
SEND