Filter
Top Products
Section 13: Tools 115
ⅷ Voice Commands—Lets you place calls, access your Contacts List, review your
appointments, and more by speaking commands into your phone. Also see "Voice
Dialing" on page 26 and "Voice Method" on page 52 for more information.
ⅷ Voice Settings—Lets you tailor VoiceSignal to better respond to your voice and
your phone use preferences.
2. Use the navigation keys to highlight the desired sub-menu, then press
.
Voice Commands
To start VoiceSignal, do one of the following:
• In standby mode, press and hold the key.
“Say a Command” appears in the display and is pronounced through the earpiece,
followed by a list of available commands.
• In standby mode, press the MENU key ( ), then press (for Tools), and
(for Voice Service), and for Voice Command.
Note: You can also set your phone to start VoiceSignal when you open the phone. See "Voice Launch" on
page 119 for more information.
VoiceSignal includes the following commands:
• Call — Lets you dial the phone by saying any name stored in your contact list,
without ever having to record, or “train” that name. VoiceSignal automatically
voice-activates all your contacts, even if you have hundreds of them stored on your
phone. You can also dial any telephone number, even if it is not stored in your
contact list, by saying the digits in the number. (See "Voice Dialing" on page 26 for
more information.)
• Send Text — Lets you launch the Create Text Msg screen. (See "Create and Send
Text Messages" on page 66 for more information.)
• Send Picture — Lets you launch the Create Pic Msg screen. (See "Send Picture
Messages in Camera Mode" on page 67 for more information.)
• Lookup — Lets you look up and display contact information for any name stored in
your Contacts list by saying the name. (See "Finding a Contacts Entry" on page 52
for more information.)
• Go to — Lets you access all of the Main Menus on your phone.
• Check — Lets you check your phone's status (that is, network coverage, signal
strength, and battery in the same report), network coverage, signal strength,
battery, and phone number.
Note: Speaking clearly, say the command that you want to use. If, after a few seconds, the device has not
recognized a command, it prompts you to repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition.
@
)
)
@
)
)