Filter
Top Products
118
ⅷ If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
5. After six sets of digits, the phone asks whether you want to do more
adaptation. Answer “Yes.”
6. Repeat steps 4 and 5 for another six sets of digits. After the second group
of six sets of digits, “Adaptation complete” plays through the speaker
and you are returned to the Adapt Digits menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press the MENU key ( ), then press (for
Tools), and (for Voice Service), (for Voice Settings), and
for Digit Dialing. The following options appear in the display:
ⅷ Adapt Digits
ⅷ Reset Digits
2. Use the navigation keys to highlight Reset Digits, then press the key.
The phone prompts you to confirm digit rest.
3. Press the OK (left) soft key ( ) to reset your digit adaptation, or press
the Back (right) soft key ( ) to cancel.
4. Press the key to reset digit dialing and exit.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1. In standby mode, press the MENU key ( ), then press (for
Tools), and (for Voice Service), (for Voice Settings), and
for Sound. The following options appear in the display:
ⅷ Prompts — Enables (On) or disables (Off) audio prompts.
ⅷ Digits — Enables (On) or disables (Off) audio digit playback.
ⅷ Names — Enables (On) or disables (Off) audio name playback.
ⅷ Name Settings — Lets you adjust the speed and volume of your phone’s audio
name playback.
2. Use the navigation keys to highlight the desired setting.
3. Press the key to accept the new setting.
@
)
)
@
)
)