Filter
Top Products
Display
76
Banner
(Menu 5-4)
This option allows you to set a banner message to
display at the bottom of the display in Standby
mode. However, the banner massage could be
displayed, when the Wallpaper is setted on Digital
Clock1.
1. If necessary, press repeatedly to delete
each letter of the old greeting. Press and hold
to clear the display.
2. Enter your banner message of up to 15
characters.
For further information about how to enter
characters, see page 34.
3. When you finish entering the message, press
the
Save
soft key to store the new banner.
Backlight
(Menu 5-5)
You have several options for setting how the
backlight operates. Remember that backlight use
drains your battery faster.
The following options are available:
Always On
: the backlight is always on.
Always Off
: the backlight is always off.
8/15/30 Seconds
: the backlight switches on
when you press a key and switches off after 8/15/
30 seconds if you don’t press any key.
Display
77
LCD Contrast
(Menu 5-6)
The menu allows you to adjust the brightness of
the LCD screen.
Press to make the brightness of screen letters
lighter, and to make it darker.
Each time you press the key, you will see the
selected status of the brightness of letters.
Press the
Select
soft key to save what you set the
value of color.
Quick Menu Indicator
(Menu 5-7)
In this menu, you can set whether or not the
menu Quick Menu indicators are displayed on the
dial screen.
While dialing numbers in Standby mode, you can
press the appropriate Navigation key to access the
preset menu you want.